Midi Out

Injects midi events into a device or stream.

Pins

io	letter	name	unit	description
in
	si	stream in	stream	Stream to inject events into.
	s1	stream in		Stream to merge with si.
	N	number	midi	Number portion of the event.
	V	value		Value portion of the event.
	t	trigger	logic	When to inject event.
out	so	stream out	stream	Resultant stream.

Parameters

name	option	mode	description
output	stream	Send events to the so pin.
	device	Send events to a device.
input mode
port	stream	continuous	Merge s1 with si.
	clock	triggered	Send midi tick clock and start stop events.
	reset	triggered	Send a reset event.
channel	channel and note commands require a channel number ranging from 1 to 16.
	patch N	triggered	Send the patch specified by the N pin.
	patch	triggered	Select a patch from the list.
	pitch wheel	continuous	Send pitch wheel events.
	pressure	continuous	Send channel pressure events.
	controller N	triggered	Send the controller specified by the N pin.
	controller	continuous	Select a controller from the list.
note	track N	continuous	Track N V pins and send events when they change.
	track t	triggered	Send note N when t triggers, track V to send pressures events.
	on	triggered	Send note on specified by N and V.
	off	triggered	Send note off specified by N and V.
	pressure	triggered	Send note pressure specified by N and V.

Notes

The Midi Out object is an injector. Use it to put commands into an output destination. The destination may be a device or a midi stream. Many of the command modes have the ability to track input values and automatically send commands when appropriate. Continuous Vs Triggered Continuous modes track the input pin and automatically send the specified event. The input has to change enough to warrant sending the event. Input values are rounded to the closest midi number. Example: If the V input changes from 23.2 to 23.3, an event will not be sent (because the midi number is still 23). But if V changes from 23.3 to 23.6, an event will be sent, because the midi number changed from 23 to 24. To avoid filling up streams, no more than 16 events can injected by one object in one frame. Triggered modes require an edge at the t pin. When triggered, the event will be injected immediately. Clock Start Stop This mode monitors the t pin and sends a clock event when it changes sign. Changing the sign of the V pin will emit a start or stop event. Patch and Controller Numbers Select from the list of GM patch assignments or standard controllers, or enter in a number of your choice. Track Notes There are two ways to track notes. 1) Track N monitors the N pin and issues note off/on event when it changes. The V pin is also monitored and sends note pressure events. 2) Track t monitors the t pin. When t goes negative, a note on event will be sent. When t goes positive, a note off event will be sent. Changes to the V pin will emit note pressure events.